Some users have no idea how to change BMW KM using the Xhorse VVDI BIMTool Pro programmer. The instructions are in the user manual. Support type: EWS1/EWS2 EWS3, EWS4, CAS1, CAS2, CAS3, CAS3+, CAS4(0L15Y), CAS4 (5M48H). CAS3+ encrypt version select CAS3+ type. Change KM for EWS/CAS: Load EEPROM dump, input new KM value, press button “Change KM” and save new EEPROM dump then write back it to EEPROM. VVDI BMW Tool CAS1/CAS2/CAS3/CAS3+ change KM steps: 1) Record the KM information displayed in instrument, take instrument away from the avoid synchronize KM with CAS automatically 2) Set CAS KM to 0 (you can do this via OBD or EEPROM dump, select correct CAS version) 3) Read instrument EEPROM dump by programmer ( VVDI Prog or Multi Prog ) then save EEPROM dump you read,usually it use M35080 chip 4) Select File Change KM ->M35080 (Instrument) and load EEPROM dump saved instep 3 Attention: this type instrument has 2 algorithms for KM, Algorithm ...
Xhorse VVDI BIM Tool Pro software and hardware technical support from vvdishop.com.