Xhorse VVDI BIM Tool Pro

  Xhorse released new software  V1.8.4 for   VVDI BIMTool Pro   on Dec. 24th, 2021.   *** 2021-12-24 *** Require firmware V1.8.4 ===== BMW V1.8.4 ===== ******** This version must update the device firmware to V1.8.4 ******** 1. Improvement for E-Series programming and coding 2. Improvement for F/G-Series programming and coding 3. Bugfix   Free Download Xhorse VVD BIMTool Pro Software V1.8.4

  Today we are going to read the ISN code from a 2013 BMW F31 N20 F series DME using the   Xhorse VVDI BIMTool pro   programmer.   We’re using the BIM Tool ECU adapter which is different to the vvdi prog bmw adapter (Read  VVDI Prog Read BMW N20 N13 ISN with MOE Cable No Soldering ) Follow the wiring diagram to connect DME with vvdi bim tool Select the correct ECU. It is an F series N20 so that’s the MEVD 17.2.9 Read ECU ISN communicating 100 percent press ok to save and then we have the ISN. so it works. Just in case anybody wants to know you can read the isn from one of these DMEs with  vvdi bim tool pro . It’s pretty quick. www.vvdishop.com

  I got a notification about the latest firmware and software 1.8 for the   xhorse vvdi bimtool pro   and thought I would have a go at getting the ISN read feature to work again. After some messing about it finally worked.   and we’ll see if we can read the isn’s from the dmes on the bench with bim tool pro with the new update. I’ve actually found a download link from  vvdishop.com  V1.8.0 VVDI BMW Tool software download   i’ve just downloaded and powered up the software. my original msd80 that hasn’t been bricked yet down the bottom this is the one that i bricked a couple of weeks ago when i was trying out this isn’t read the other day gonna be interested to see if xhorse bim tool will restore it i can restore it with a wing kfp but it’s just an msd 80 that i did just connect it to my original one and i’ve read the data off my original seems to be working we’ll go through and do the update. Go to Update Online- Update device firmware The we go to...

  How to use   Xhorse VVDI BIMTool Pro   to unlock BMW CAS4/4+ key via DOIP? This is a quick demo of the procedure.   Operation Video: https://www.youtube.com/watch?v=fNiW7rGX4Sg   Steps Plug Ethernet cable into DOIP port, make sure “Local Area Connection” is connected.   Start  BIM Tool software , it is showing “CONNECT 2 – OK”, which means connection is successful. Click “Connect” to identify BMW system. To read key info, click CAS key learn >> OBDII – BMW CAS4/CAS4+ – F-Series >> Get key info   Unlock CAS4/CAS4+ Unlock CAS4/CAS4+ >> Yes >> Yes >> Save Now you can use the coding file to continue programming BMW keys. You may need: How to connect VVDI BIM Tool Pro via USB & DOIP? http://blog.vvdishop.com/connect-vvdi-bim-tool-pro-via-usb-doip/   Using VVDI BIM Tool Pro via DOIP port can greatly quicken the speed when coding & programming. For programming to new module can even complete in 20 minutes. htt...

  This article aims to intro the VVDI BIMTOOL Pro tool’s new function: BMW E/F/G programming and coding BMW E/F/G programming and coding is the most important new feature of  Xhorse VVDI BIM Tool Pro Tool .The ethernet interface will speed up the writing data instead of the USB cable previously used to connect to the BMW Tool. Part 1. Program / Code BMW Exx Connect Car   Can auto detect vehicle model, read module information, support chassis: E36, E38, E39, E46, E52, E53, E60, E63, E64, E65, E66, E67, E70, E71, E72, E83, E85, E86, E89, E90, E91, E92, E93, K1X, K24, KH2, R50, R52, R53, R55, R56, R57, RR1,.etc chassis   Read and write Vehicle configuration(FA/FP) Can read the configuration information inside of vehicle module, and to change the vehicle configuration information for replacing second-hand module.   Registered unit information from gateway / Calculate adaptive control unit Read registered unit information from gateway Calculate adaptive control unit-...