Xhorse VVDI BIM Tool Pro

  Xhorse VVDI2   has been long been tested with no issue with the   xhorse CAS plug   adapter (check   previous post ). Now the   Xhorse VVDIM BIMTool Pro   has confirmed working too. After the recent software and firmware updates you can now connect directly to a cas2 cas3 cas3+ cas3++ cas3+ istap directly without the need for the junction box. This allows you to read isn on bench, add key, downgrade istap and a few other functions. Make sure you are on current software and CAS plug from xhorse. The released the CAS plug as being able to correct connect directly to a CAS without a JBE module so you can do bench testing or mrp downloads on the bench downgrades with the CAS plug This is the pinout required for a vvdi bim tool to cas plug to work they will work both vvdi2 and vvdi bimtool CAS1 CAS3 CAS2 CAS3+ CAS++ it will do pretty much all the CAS modules apart from CAS4 in the vvdi hardware range You do need 12 volt source. You get a 12 v pl...