Skip to main content

Program BMW E70 All Keys Lost with Xhorse VVDI BMW

 Possible to make BMW X5 E70 2009 4.8 all keys lost with Xhorse VVDI BMW tool/VVDI BIMTool Pro if i I’ve got CAS3+ eeprom dump from vvdi prog and Bosch ME9+ dump from K-tag?

Program BMW E70 All Keys Lost with Xhorse VVDI BMW 1

Yes. Not work by obd. If you have the files, do as following:

Select key position. Prepare dealer key with vvdi bmw programer.

Then select have ecu dump, load ecu eeprom dump.

Put blank key in slot and click ok.

vvdi bmw will give you a new eeprom that you have to write back in cas3.

Write it via vvdi prog.

Put cas3 back to the car and key will work.

 

 

 

If key is engaded, but ignition doesn’t switch on (displays CAS lost ISN value error shown image below), you need to read ISN from EGS if it is E70. You have to manually input the EGS ISN into CAS. Find a guy who can help you. Need only small program and Ediabas-compatible cable and that’s all.
Program BMW E70 All Keys Lost with Xhorse VVDI BMW 2
http://blog.vvdishop.com/program-bmw-e70-cas3-akl-with-xhorse-vvdi-bmw-tool/
Labels:

Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI BIMTool Pro Update to V1.8.8

  Xhorse VVDI BIMTool Pro   software update to V1.8.8 on June 15th, 2023.   2023-06-15 Require firmware V1.8.4 ===== BMW V1.8.8 ===== 1. Improvement the internet connection 2. Bugfix Free download VVDI BIMTool software V1.8.8 http://dl.xhorse.com/product/bmwtool/software/BMWTOOL-InstallerV188.exe
Post a Comment
Read more

VVDI BIM Tool Pro E F G Series Coding Guide

  This article aims to intro the VVDI BIMTOOL Pro tool’s new function: BMW E/F/G programming and coding BMW E/F/G programming and coding is the most important new feature of  Xhorse VVDI BIM Tool Pro Tool .The ethernet interface will speed up the writing data instead of the USB cable previously used to connect to the BMW Tool. Part 1. Program / Code BMW Exx Connect Car   Can auto detect vehicle model, read module information, support chassis: E36, E38, E39, E46, E52, E53, E60, E63, E64, E65, E66, E67, E70, E71, E72, E83, E85, E86, E89, E90, E91, E92, E93, K1X, K24, KH2, R50, R52, R53, R55, R56, R57, RR1,.etc chassis   Read and write Vehicle configuration(FA/FP) Can read the configuration information inside of vehicle module, and to change the vehicle configuration information for replacing second-hand module.   Registered unit information from gateway / Calculate adaptive control unit Read registered unit information from gateway Calculate adaptive control unit-...
Post a Comment
Read more

VVDI BIMTool Pro BMW FEM BDC KM Reset Guide

  Tutorial:   BMW Series F series Reset FEM BDC mileage eeprom 95128-95256 using   Xhorse VVDI BIMTool Pro . i.e. F20 FEM module Procedure: Remove BMW FEM module from the vehicle Set up bench connection. Connect VVDI BIMTool pro with  godiag BMW FEM test platform , FEM module, feed vvdi with 12v+ power supply (very important) Turn on ignition switch of the godiag test platform Run  Xhorse vvdi bim tool software , go to BMW/FEN Key Learn and Get key Information As you can see 2 keys are programmed and you can see VIN and current mileage is  183374 KM Press  Reset KM BIMTool will ask to program FEM/BDC first Press Program BMW FEM/BDC System Follow 4 steps to program BMW FEM/BDC Step 1. Backup coding Read FEM/BDC coding ia OBDII or on bench Step 2. Prepare service EEPROM Open FEM/BDC shell, find 95128/95256 chip position, read EEPROM dump via BDM programmer Load original eeprom dump and save special EEPROM dump, write special EEPROM dump back to...
Post a Comment
Read more