Skip to main content

Xhorse VVDI BIMTool Pro vs VVDI2 BMW

 Is the new vvdi bim pro an upgrade to the vvdi2.  or are they 2 separate and different functions?

What is the difference between Xhorse VVDI2 & VVDI BIMTool Pro key programmer?

 

Xhorse VVDI2 BMW vs. VVDIBIMTool Pro

ItemVVDI2 BMWVVDI BIMTool Pro



ColorYellowBlue
FunctionsLocksmithLocksmith, programming, coding.
Programming FunctionNo supportSupport CAN, DOIP.
Support SystemEWS to CAS1, CAS2, CAS3/3++, CAS4/4+, FEM, BDCEWS to CAS1, CAS2, CAS3/3++, CAS4/CAS4+, and the latest FEM/BDC system.
UpdateFree for software online.Firmware update free via “Update Kit”.Free for software online.Firmware update free via “Update Kit”.
Unit coding√√
OBD key learn√√
File make key√√
Mileage correction√√
Read & write EWS/CAS EEPROM√√
Synchronize DME-CAS, synchronize CAS-ELV√√
Unlock key√√
Generate specialized chips√√
Generate remote control√√
Fix CAS4 EEPROM key programmer√√

Differences
VVDI BIMTool Pro has all the features of VVDI2, it also has E/F/G encoding and 8HP gearbox functions.

It adds an ethernet port to support coding & programming a single module via CAN/DOIP, which extremely increases the speed of coding and programming. Moreover, it also supports BMW’s latest FEM/BDC system.

Similarities
Xhorse VVDI2 and VVDI BIMTool Pro are both suitable for a locksmith, which are including the same features such as unit coding, OBD key learns, file makes learn…etc. The VVDI BIMTool Pro IMMO and KM function supported BMW car year similar to the VVDI2 BMW key programmer.

Their software installation is similar, both of VVDI2 and VVDI BIMTool Pro software free update online. Using Xhorse update kit software can free update firmware.

Conclusion
Xhorse VVDI2 commander is suitable for locksmiths, which is mainly used for key programming.

VVDI BMW BIMTool Pro is suitable for a car repair shop, which not only requires key programming but also requires coding & programming features for maintenance diagnosis.

https://www.vvdishop.com/service/xhorse-vvdi2-vs-vvdi-bimtool-pro.html

Labels:

Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI BIMTool Pro Update to V1.8.8

  Xhorse VVDI BIMTool Pro   software update to V1.8.8 on June 15th, 2023.   2023-06-15 Require firmware V1.8.4 ===== BMW V1.8.8 ===== 1. Improvement the internet connection 2. Bugfix Free download VVDI BIMTool software V1.8.8 http://dl.xhorse.com/product/bmwtool/software/BMWTOOL-InstallerV188.exe
Post a Comment
Read more

VVDI BIM Tool Pro E F G Series Coding Guide

  This article aims to intro the VVDI BIMTOOL Pro tool’s new function: BMW E/F/G programming and coding BMW E/F/G programming and coding is the most important new feature of  Xhorse VVDI BIM Tool Pro Tool .The ethernet interface will speed up the writing data instead of the USB cable previously used to connect to the BMW Tool. Part 1. Program / Code BMW Exx Connect Car   Can auto detect vehicle model, read module information, support chassis: E36, E38, E39, E46, E52, E53, E60, E63, E64, E65, E66, E67, E70, E71, E72, E83, E85, E86, E89, E90, E91, E92, E93, K1X, K24, KH2, R50, R52, R53, R55, R56, R57, RR1,.etc chassis   Read and write Vehicle configuration(FA/FP) Can read the configuration information inside of vehicle module, and to change the vehicle configuration information for replacing second-hand module.   Registered unit information from gateway / Calculate adaptive control unit Read registered unit information from gateway Calculate adaptive control unit-...
Post a Comment
Read more

VVDI BIMTool Pro BMW FEM BDC KM Reset Guide

  Tutorial:   BMW Series F series Reset FEM BDC mileage eeprom 95128-95256 using   Xhorse VVDI BIMTool Pro . i.e. F20 FEM module Procedure: Remove BMW FEM module from the vehicle Set up bench connection. Connect VVDI BIMTool pro with  godiag BMW FEM test platform , FEM module, feed vvdi with 12v+ power supply (very important) Turn on ignition switch of the godiag test platform Run  Xhorse vvdi bim tool software , go to BMW/FEN Key Learn and Get key Information As you can see 2 keys are programmed and you can see VIN and current mileage is  183374 KM Press  Reset KM BIMTool will ask to program FEM/BDC first Press Program BMW FEM/BDC System Follow 4 steps to program BMW FEM/BDC Step 1. Backup coding Read FEM/BDC coding ia OBDII or on bench Step 2. Prepare service EEPROM Open FEM/BDC shell, find 95128/95256 chip position, read EEPROM dump via BDM programmer Load original eeprom dump and save special EEPROM dump, write special EEPROM dump back to...
Post a Comment
Read more