Xhorse VVDI BIM Tool Pro

  Does   xhorse vvdi bimtool pro   support E series 8HP EGS?   No, there is no 8HP in E series in the menu. VVDI BIMTool Pro supports BMW E series 6HP, F series 6HP and F series 8HP. VVDI BIM Tool  BMW EGS Function Introduction: Read gearbox status:  Support to read 8HP gearbox status, whether it is a new, etc Diagram:  OBD and gearbox connection diagram Backup coding:  Back up the code in the gearbox Restore coding:  Restore the code in the gearbox Clear the F-Series 8HP Gearbox ISN : Clear the internal information that have used which have been matched and make them to new part Reset F-8HP adaptation:  Restore the adaptation information in the gearbox to the initial status Reset F-6HP EWS:  Restore the immo information in the gearbox to the initial status Read E-6HP ISN (E70, E65 and E63):  Read the ISN information from the gearbox, it is possible to get several ISN values, but only one is correct. The ISN you get is 4 b...

  Problem: I installed all the  Xhorse VVDI BIMTool pro  software but nothing is working and tool always says booting. Any solution? Solution: Update vvdi bim tool pro firmware to latest version via Xhorse upgrade kit. Then try again.

  Can  Xhorse VVDI BIMTool Pro   read ISN from ECU DDE (diesel ECU)? Yes, the BIMTool pro can directly read the ECU ISN, and support the following types in picture below. EDC17C45 EDC17C56 EDC17C50 (Fxx) EDC17CP49 MEVD17.2.3 (B38) MEVD17.2.K (B38) MEVD17.2.4 (Exx N20) MEVD17.2.4 (Fxx N20) MEVD17.2.5 MEVD17.2.6 (N55) MEVD17.2.8 MEVD17.2.9 (Exx N20) MEVD17.2.9 (Fxx N20) MEVD17.2.H MEVD17.2.P (Fxx N20) MEVD17.2.G (N55) MEVD17.2.G (Fxx N55)   Select the correct type, connect as connection diagram, and click “Read ISN” to read it. If you can’t read it, you can click “Upgrade ECU Adapter”. If the adapter can be upgraded means it is normal, check whether the connection and option are correct, and try to read repeatedly. Here is an example Xhorse VVDI BIMTool Pro read BMW F31 N20 ISN Success

  Xhorse VVDI BIMTool Pro  can change CAS1, CAS2, CAS3, CAS3+, CAS4 (0L15Y), CAS4 (5M48H) KM (mileage) via dump file.   How to Change BMW CAS1-CAS4 KM with VVDI BIMTool Pro?   Change KM for EWS/CAS: Load EEPROM dump, input new KM value, press button Change KM and save new EEPROM dump then write back it to EEPROM. CAS1/CAS2/CAS3/CAS3+ change KM steps: 1) Record the KM information displayed in instrument, take instrument away from car avoid synchronize KM with CAS automatically 2) Set CAS KM to 0 (you can do this via OBD or EEPROM dump, select correct CAS version) 3) Read instrument EEPROM dump by programmer then save EEPROM dump you read, usually it use M35080 chip 4) Select File Change KM ->M35080 (Instrument) and load EEPROM dump saved in step 3 Attention: this type instrument have 2 algorithm for KM, Algorithm 1 and Algorithm 2， you need try different algorithm to check the Old KM in file value, which one is nearby the KM (write in step 1)), which is the right t...

  If failed to downgrade BMW CAS3++(istap) with   Xhorse VVDI BIMTool Pro   and data corrupted after programming key via OBD. BIMTool has a option to repair BMW CAS3++.   OBDII-CAS3+ ISTAP Repair For suddenly condition cause CAS enter service mode while update ISTAP*, select this type to repair (OBDII-CAS3+ ISTAP Version). You need know CAS ID before continuing. You can input the CAS ID or load EEPROM for read CAS ID. Use the known CAS ID to repair: if you have record CAS ID before update CAS flash can use this way. Use the CAS EEPROM to repair: If can’t read CAS ID, you can use this way to repair, you need to have the CAS EEPROM dump file. VVDI BIM TOOL Pro  EEPROM Repair (CAS1, CAS2, CAS3, CAS3+) Support loading EEPROM dump file in service model, Then automatically repair the service mode status and save the new EEPROM dump file. Step: Load the EEPROM dump file that needs to be repaired, and it prompts that you need to load the FLASH file. If you nee...

  We have many customers asking for Xhorse VVDI BIMTool Pro user manual. The manual can be downloaded for free here.   Xhorse VVDI BIMTool Pro User Manual Contact including: EEPROM/KM/Sync Code (OBD)/ISN Key Learn File Make Key Unlock Key File Change KM CAS Repair CAS Plug FEM/BDC Key Learn Exchange ECU/CAS E/F/G Gearbox Exx Program/Code Special Function (OBDII- CAS1 Repair, OBDII CAS3+ ISTAP Repair, EEPROM Repair) etc   Examples: Xhorse VVDI BIMTool Pro Write BMW CAS3++(ISTAP) ISN BMW E61 E60 Airbag Seat Occupancy Sensor Coding with Xhorse VVDI BIMTool How to Reset BMW FEM/BDC Mileage KM with VVDI BIMTool Pro? Xhorse VVDI BIMTool Pro BMW FEM/BDC Backup Coding No Fuse BMW E60 CAS3 Comfort Access Coding by Xhorse VVDI BIMTool Pro Connect VVDI BIMTool with CAS Plug for bench work Xhorse VVDI BIMTool Pro read BMW F31 N20 ISN Success Xhorse VVDI BIMTool Pro Read BMW MSD80 ISN and Change VIN Success How Xhorse VVDI BIMTool Pro Unlock BMW CAS4/4+ via Ethernet? VVDI BIMTool Pro...

  Xhorse VVDI BIMTool Pro   can support reading & write ECU ISN via OBDII. This is writing a new ISN for BMW CAS3++(ISTAP) when all keys lost.   Run VVDI BIM Tool to connect CAS3 module, Exchange ECU/CAS >> Type: CAS – CAS3+(0L15YM, 0M23S)(ISTAP) – OBDII >> Read module information CAS3 unit info was read out. To write ISN, please read ISN or load EEPROM to get ISN first. Click “Read ECU ISN”. If you have working key, then you can get CAS ISN from working key. If all key lost, then BMWTOOL will fill new ISN. Do you have working key? No. Paste the new ISN to be written in “Update ISN” option, click “Update module”. The dealer key should be taken away from ignition switch. If key is keyless, please move it out of car. If there’s no key in ignition, continue anyway. Click “OK” to continue. Reading data, please wait… Writing data success. Done. This is how to write CAS3++ ISN with  VVDI BMW Tool  by OBD. https://www.vvdishop.com/service/vvdi-bimtool-p...