Xhorse VVDI BIM Tool Pro

  Xhorse VVDI2   has been long been tested with no issue with the   xhorse CAS plug   adapter (check   previous post ). Now the   Xhorse VVDIM BIMTool Pro   has confirmed working too. After the recent software and firmware updates you can now connect directly to a cas2 cas3 cas3+ cas3++ cas3+ istap directly without the need for the junction box. This allows you to read isn on bench, add key, downgrade istap and a few other functions. Make sure you are on current software and CAS plug from xhorse. The released the CAS plug as being able to correct connect directly to a CAS without a JBE module so you can do bench testing or mrp downloads on the bench downgrades with the CAS plug This is the pinout required for a vvdi bim tool to cas plug to work they will work both vvdi2 and vvdi bimtool CAS1 CAS3 CAS2 CAS3+ CAS++ it will do pretty much all the CAS modules apart from CAS4 in the vvdi hardware range You do need 12 volt source. You get a 12 v pl...

  Xhorse released new software  V1.8.4 for   VVDI BIMTool Pro   on Dec. 24th, 2021.   *** 2021-12-24 *** Require firmware V1.8.4 ===== BMW V1.8.4 ===== ******** This version must update the device firmware to V1.8.4 ******** 1. Improvement for E-Series programming and coding 2. Improvement for F/G-Series programming and coding 3. Bugfix   Free Download Xhorse VVD BIMTool Pro Software V1.8.4

  Question: Can  Xhorse VVDI BIMTool Pro  Read /write BMW FRM (Footwell module) EEPROM and repair flash?     Answer: No.  VVDI BIM Tool won’t repair FRM module. It is for BMW key programming and coding. Go for  vvdi prog  or key tool plus instead. Check:  How to Repair BMW FRM E Series XEQ384 via VVDI Prog? VVDI Key Tool Plus  has the function of vvdi prog inside? Can read and write frm module, etc? Yes, key tool plus will read and write parts of FRM modules of  E chassis .  FRM clip adapter is required. Xhorse VVDI Key Tool Plus Repair BMW MINI FRM XEQ384 Data

  Today we are going to read the ISN code from a 2013 BMW F31 N20 F series DME using the   Xhorse VVDI BIMTool pro   programmer.   We’re using the BIM Tool ECU adapter which is different to the vvdi prog bmw adapter (Read  VVDI Prog Read BMW N20 N13 ISN with MOE Cable No Soldering ) Follow the wiring diagram to connect DME with vvdi bim tool Select the correct ECU. It is an F series N20 so that’s the MEVD 17.2.9 Read ECU ISN communicating 100 percent press ok to save and then we have the ISN. so it works. Just in case anybody wants to know you can read the isn from one of these DMEs with  vvdi bim tool pro . It’s pretty quick. www.vvdishop.com

  Problem: I need help! Laptop cannot find my  Xhorse vvdi bim tool pro , Check error images here: Error “Can’t find BMW Tool, Reconnect BMW Tool and try again” Solution:  These are common solutions to cannot find  VVDI tool  problems. Disconnect and reconnect BIM Tool Pro. Install device driver. Change another USB port Change another laptop and try again.   V1.8.0 VVDI BMW Tool software download   Read also: How to Connect VVDI BIM Tool Pro via USB & DOIP?

  The   Xhorse VVDI BIMTool Pro  reports error 211 when I was trying to flash an EGS transmission. “Error:211 Error om flash programming Programming state invalid.” Solution: Slow down the communication speed between the  vvdi bimtool  and the control unit. Go to  Option  tab-  Parameters settings – change programming speed to  1    (it is three by default). Read also: Xhorse VVDI BIMTool Pro Read BMW MSD80 ISN and Change VIN Success

  I got a notification about the latest firmware and software 1.8 for the   xhorse vvdi bimtool pro   and thought I would have a go at getting the ISN read feature to work again. After some messing about it finally worked.   and we’ll see if we can read the isn’s from the dmes on the bench with bim tool pro with the new update. I’ve actually found a download link from  vvdishop.com  V1.8.0 VVDI BMW Tool software download   i’ve just downloaded and powered up the software. my original msd80 that hasn’t been bricked yet down the bottom this is the one that i bricked a couple of weeks ago when i was trying out this isn’t read the other day gonna be interested to see if xhorse bim tool will restore it i can restore it with a wing kfp but it’s just an msd 80 that i did just connect it to my original one and i’ve read the data off my original seems to be working we’ll go through and do the update. Go to Update Online- Update device firmware The we go to...